+33 (0)4 67 25 79 79 ROUTE DE PEZENAS – 34230 PAULHAN – FRANCE

Lateral moves

The lateral moves support the irrigation on both sides, in any form. Used by farmers in the entire world, the IRRIFRANCE’s irrigation lateral moves are robust and have a long lifetime. Each IRRIFRANCE lateral moves can be adapted to every need and in every situation. The agricultural irrigation lateral moves advantage is its hydraulic consumption much lower than a canon : which is a non neglectable saving during the irrigation periods.

Water system:

The water system is realized by pipe in smooth polyethylene with lengths. The water system can also be assured by pumping in a located canal along the ramp training.

Electric system:

The electrical energy for the ramp power supply can is provided through a cable or with a board power generator. RM4/VE and RM4TD ramps can work in round trip with the possibility of rotation in the plot wipe. This rotation can be internal without irrigation or external with irrigation. The double nozzle device insures water supply in any case.

  • All the elements constituting the pivot are hot-dip galvanized with 480° hardening.
  • Copper electrical cables 4G4 mm² + 7×1.5 mm² : Special coating of PVC-based electrical cables for increased resistance to weathering, UV and rodents.
  • All the components purchased and the basic materials used to manufacture the pivots are certified and meet irrigation standards.
  • All screws and nuts are in 8/8 galvanized and dichromated quality. The screw diameters range from M10 to M20 and all nuts are self-locking.
  • Low annual maintenance and servicing cost: 0.25% of the pivot amount.
  • All Irrifrance pivots and ramps have a 3-year structural guarantee.


  • Retractable Overhang
  • Pivoflex
  • Polychem
  • Ferti-Irrigation / Chemigation 

RM4T and RM4TD lateral moves

RM4VE and RM4L lateral moves

RM2-4L and RM2-4PL lateral moves

RM2 and RM2-4 lateral moves